Oven Incubator
 |
 ROBBINS 404 FLEXCHEM CHEMICAL ROTATING OVEN INCUBATOR 2  US $3,709.00
|
 ROBBINS 404 FLEXCHEM CHEMICAL ROTATING OVEN INCUBATOR 1 US $3,709.00
|
 ROBBINS 400 ROCKER HYBRIDIZATION INCUBATOR OVEN US $1,590.00
|
 THERMOLYNE OV35540 LABORATORY OVEN INCUBATOR TESTED US $1,209.00
|
 NAPCO MODEL 7301 CO2 GAS INCUBATOR LAB OVEN XLNT US $1,200.00
|
 VWR Oven Incubator Shaker Model 1575 ZZMFG Sheldon Lab Laboratory US $1,199.95
|
 TECHNE HB 1D HYBRIDIZER HYBRIDIZATION INCUBATOR OVEN 3 US $1,170.00
|
 TECHNE HB 1D HYBRIDISER HYBRIDISATION INCUBATOR OVEN 2 US $1,169.00
|
 TECHNE HB 1D HYBRIDISER HYBRIDISATION INCUBATOR OVEN 1 US $1,069.00
|
 Boekel Incubating Oven Digital Incubator 133730 US $1,065.18
|
 SANYO GALLENKAMP HOTBOX SIZE 1 52 LITRE OVEN INCUBATOR US $860.00
|
 VWR 1535 Incubator Oven US $850.00
|
 BOEKEL INCUBATING OVEN DIGITAL INCUBATOR 133730 US $849.95
|
 STOVALL H010115 HYBRIDIZATION HYBRIDISATION HYBRID OVEN INCUBATOR ROTATING RO US $838.50
|
 Techne Hybridiser HB 1D Oven Incubator US $819.18
|
 Thermolyne Laboratory Oven Incubator model OV35135 GUARANTEED US $799.99
|
 VWR Incubator ROTARY HYBRIDIZATION OVEN Model 5420 US $749.00
|
 GALLENKAMP LABORATORY OVEN INCUBATOR INC100130Y US $719.99
|
 VWR Incubator ROTARY HYBRIDIZATION OVEN US $700.00
|
 Robbins Scientific 400 Hybridization Incubator Oven US $699.99
|
 Stratagene Hybridizer 700 Lab Oven Incubator Warranty US $699.00
|
 SL SHEL LAB VWR LAB INCUBATOR OVEN 1515E 40 Cu Ft US $495.00
|
 NAPCO MODEL 620 OVEN INCUBATOR US $479.20
|
 PRECISION SCIENTIFIC THELCO MODEL 4 INCUBATOR OVEN US $474.95
|
 Robbins Scientific 400 Hybridization Incubator Oven 3 US $399.99
|
 Robbins Scientific 400 Hybridization Incubator Oven US $399.99
|
 Cenco Central Scientific Lab Heater Oven Incubator 400W US $399.99
|
 THERMOLYNE TYPE 19200 OVEN INCUBATOR US $399.99
|
 REVCO ULTIMA DRY OVEN INCUBATOR US $390.00
|
 Hybridization Incubator Boekel 131000 oven With Bottles vessels FREE SHIPPING US $389.98
|
 Labline Incubator Oven Heater Model 100 NEW $299 NEW US $299.00
|
 Corning 711 712 Incubator Oven US $295.00
|
 Hybaid hybridization oven incubator hybridizer Maxi 14 US $295.00
|
Industrial Tool
Digital Calibration Technology is an independent facility established in 1999 providing quality repair & calibration services for testing and measuring instruments.
"One stop shopping"- This is what our customers want, what they need, and it is what we Provide.We listen to you and make every effort to provide the service that you need to satisfy your business requirements. This is what has made "Digital Calibration" foremost in Faridabad.
We Provide:
Repair services, on site calibration, AMC for calibration, Automatic recall when instruments are due for calibration.
MACHANICAL INSTRUMENTS
- VERNIER CALIPER
- DEPTH CALIPER
- HEIGHT GAUGE
- OUTSIDE MICROMETER
- DEPTH MICROMETER
- DIAL INDICATOR/THICK GAUGE
- DIAL TEST INDICATOR(LEVER TYPE)
- BORE GAUGE
- BEVEL & ANGLE PROTRACTOR
- COMBINATION SET
- MEASURING TAPE
- STEEL SCALE
- COATING THIC GAUGE/DFT METER
- FOIL CALIBRATION
- EYE PIECE
- PLAIN PLUG GAUGE
- PLAIN RING GAUGE
- MEASURING PIN GAUGE
- FILLER GAUGE
- FORD CUP
- LENGTH BAR
- PRECISION SQUARE
- "V" BLOCK
- ANGLE PLATE
- SURFACE PLATE
- BENCH CENTRE
- BURSTING STRENGTH TESTER
- PRESSURE GAUGE
- VACUUM GAUGE
- PUSH PULL GAUGE
- RUBBER HARDNESS TESTER
- SPRING BALANCE
- ELECTRONIC/BALANCE(200gms)
PROCESS INSTRUMENTS
- PH METER
- CONDUCTIVITY METER
- RPM TACHO METER
- TIMER / STOP WATCH
TEMPERATURE INSTRUMENTS
- DIGITAL TEMP CONTROLLER
- PID TEMP CONTROLLER
- TEMPERATURE RECORDER
- TEMPERATURE SCANNER
- THERMOCOUPLE / RTD
- GLASS THERMOMETER
- THERMOHYGROMETER
- LABORATORY OVEN
- LABORATORY AUTOCLAVE
- LABORATORY MUFFLE FURNACE
- INDUSTRIAL OVEN / FURNACE
- RAFRIGERATED BATH
- STERLIZER / COLD CHAMBER
- BOD INCUBATOR
- ENVIRONMENTAL CHAMBER (RH/'C)
- INFRARED TEMP GUN
- MILLI VOLT/AMP/TEMP CALIBRATOR
- RTD SIMULATOR /CALIBRATOR
REPAIR SERVICES
If deviation from the Instruments specifications are detected during calibration or if repair are necessary, our trained personnel can make adjustments or repair immediately. Time consuming transportation from the calibration laboratory to the repair shop and back is eliminated. After the cost estimate has been approved, repair is performed using original parts and calibration is resumed immediately thereafter
About the Author
JSR Trade.com is an exclusive and leading B2B market place that provides a common platform for all the buyers and sellers to trade with each other . Largest online B2B business directory for Indian & International Companies...
Are old blueprints worth anything - see details.?
Blueprints are not in perfect condition but very readable.
A few examples of what is drawn:
1. Blood Serum Oven
2. Incubator
3. Distilling Apparatus
4. Glass Blowers Fire (a torch for glass molding)
5. Blast Lamp
6. Special Float (it's what resides in the bottom of a toilet tank)
7. Tubular Shower (it's a Shower Head)
All are dated late 1800's to 1917, most are dated 1913 or 1914. I only listed a few of the items I have.
I'm not sure if they are originals or copies, they are all dated and on thick white paper.
My relative worked at the company (Boekel Scientific) which was throwing them out.
All are aroound 2.5 feet wide by about 1.5 foot tall - guessing, didn't actually measure.
Thanks for any info!
Take them to the closest museum or to the public library for evaluation and /or for references to possibly interested parties. The older ones would naturally have the higher value; however, the subject matter could be a factor too.
Labtop Instruments, Mumbai, Maharashtra, India
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.